|
Post by tixon19 on Feb 13, 2019 20:06:20 GMT
Hi guys, hello guys, I have a dms dp5 for years and I never had problems until today. I tried to update the marlin, (the autohome does not work well) and now the screen is blocked, I do not understand much programming, I think it completely deconfigures the printer, can someone please pass me a marling for my printer please !!
|
|
|
Post by kioskfan on Feb 13, 2019 20:45:02 GMT
Anyone out there have a fresh copy of DP5 Marlin?
|
|
|
Post by tixon19 on Feb 13, 2019 21:29:52 GMT
Anyone out there have a fresh copy of DP5 Marlin? Hello friend, no, there is not a copy, it was a mistake. I do not have marlin, can you help me please?
|
|
|
Post by kioskfan on Feb 13, 2019 22:59:15 GMT
Anyone out there have a fresh copy of DP5 Marlin? Hello friend, no, there is not a copy, it was a mistake. I do not have marlin, can you help me please? About 30 members have seen this post, I'm sure we'll find someone. Have you asked Lucy?
|
|
|
Post by kioskfan on Feb 14, 2019 4:25:53 GMT
I got this from 3dprintingmeathead . He says, "I think this is ready to be uploaded to marlin in arduino if not the values can be applied with c++ folder by folder if you use the setting that only shows differences in the folders. This is the copy I sent to dms after the last attempt to update the dp5 maybe a year ago. Same hardware but it has the 9 point bed leveling and some more gentle acceleration and jerk values." And here's the file: drive.google.com/open?id=1IfKBzzZGUKoLhQSbktnnQf6QWCQrJKsl
|
|
|
Post by tixon19 on Feb 14, 2019 14:41:38 GMT
I got this from 3dprintingmeathead . He says, "I think this is ready to be uploaded to marlin in arduino if not the values can be applied with c++ folder by folder if you use the setting that only shows differences in the folders. This is the copy I sent to dms after the last attempt to update the dp5 maybe a year ago. Same hardware but it has the 9 point bed leveling and some more gentle acceleration and jerk values." And here's the file: drive.google.com/open?id=1IfKBzzZGUKoLhQSbktnnQf6QWCQrJKslthank you very much BRIAN, NOW I CAN PRINT GOOD. when doing autohome before printing, it only makes home in Z and Y . but it is not x, but it is not a problem I do it with my hand. thank you so much for help me .
|
|
|
Post by kioskfan on Feb 14, 2019 14:48:36 GMT
That's great to hear. Would it be possible for you to write up a procedure on what you did to reload the firmware? I'd really like it up for a record.
|
|