|
|
Post by HeRoD dz on Nov 17, 2018 17:43:21 GMT
hi there,
i broked my stoke 40 mm fan, can some one telle me where to find another one but not online, a kind of same 24v fan please
|
|
herod
New Member
Posts: 9
|
Post by herod on Nov 17, 2018 17:45:08 GMT
hi there,
sorry am new i posted without logging in, as i said i have the problem with the fan, and i want also know where to put the file that i printed from the sd card
|
|
|
|
Post by kioskfan on Nov 17, 2018 19:08:51 GMT
Where are you?
|
|
herod
New Member
Posts: 9
|
Post by herod on Nov 17, 2018 19:28:39 GMT
am in algeria
|
|
denis
New Member
Posts: 18 
|
Post by denis on Nov 17, 2018 19:31:52 GMT
|
|
herod
New Member
Posts: 9
|
Post by herod on Nov 17, 2018 19:35:14 GMT
i already ordered from aliexpress thanx, but the shipping is in 30 days, am searching where to find the same fan on other devices
|
|
denis
New Member
Posts: 18
|
Post by denis on Nov 17, 2018 19:45:54 GMT
i already ordered from aliexpress thanx, but the shipping is in 30 days, am searching where to find the same fan on other devices blowing music center, converters, old video cards, motherboards, power supplies.and it is better on podshipniki to put.bushings do not serve long |
|
herod
New Member
Posts: 9
|
Post by herod on Nov 17, 2018 20:48:11 GMT
i already ordered from aliexpress thanx, but the shipping is in 30 days, am searching where to find the same fan on other devices blowing music center, converters, old video cards, motherboards, power supplies.and it is better on podshipniki to put.bushings do not serve long thank you so much, what about the file on the sd card, where to fix it ? |
|
|
|
Post by kioskfan on Nov 17, 2018 21:39:49 GMT
Hopefully your part will come soon.
What are you trying to do with the file?
|
|
herod
New Member
Posts: 9
|
Post by herod on Nov 17, 2018 22:51:59 GMT
i printed the file on the sd card but i dont know where to place it ?
|
|
|
|
Post by kioskfan on Nov 18, 2018 16:40:42 GMT
The hole in the side of the printer? ![]()  |
|
herod
New Member
Posts: 9
|
Post by herod on Nov 18, 2018 20:14:39 GMT
The hole in the side of the printer? ![]() not the sd card but the gcode file nammed Zxianwei.gcode |
|
|
|
Post by kioskfan on Nov 19, 2018 0:14:46 GMT
That's an old file for holding the mechanical Z zero switch, it's been replaced by the proximity sensor. You don't need it unless you are converting back.
|
|
herod
New Member
Posts: 9
|
Post by herod on Nov 19, 2018 8:40:59 GMT
are the two fans 24v ?
i want to change them both
|
|
|
|
Post by kioskfan on Nov 19, 2018 16:51:54 GMT
Both fans are 24 volt.
|
|
