jon
New Member
Posts: 7
|
Post by jon on Aug 4, 2018 20:29:20 GMT
Has anyone had any success porting 1.1.9 over to the dp5? If so, would you be willing to post a link to the modified build?
Been trying to upload one that I modified myself, but every attempt the printer hangs on boot up. Even if I try to flash a virgin 1.1.9 it hangs.
I flash back to the original 1.0.0 with no issues.
Loading as Atmega 256 / AVRISP mk II
Thanks
|
|
jon
New Member
Posts: 7
|
Post by jon on Aug 5, 2018 12:51:36 GMT
Disregard. I was missing a bloody# that was not generating an error on compile.
Still working on it. Everything seems good so far: XYZ control, homing, and bed level detection. Just having issue on with the initial print start up - seems to be an issue with the nozzle offset.
|
|
|
Post by kioskfan on Aug 13, 2018 15:53:02 GMT
Are you getting ready to posting your code?
|
|
jon
New Member
Posts: 7
|
Post by jon on Oct 8, 2018 14:20:53 GMT
Sorry - everything got backburner'ed.
Still no luck with 1.1.9. So far I have had 1.1.8 running with just a few small hangups, but still tweaking.
I gave up on Cura tho & switched over to Mattercontrol (https://www.matterhackers.com/store/l/mattercontrol/sk/MKZGTDW6).
I am running the beta version - there is a preset configuration for the DP5, but you will need to add the G29 P5 command tho in the gcode section to get the bed leveling to work properly (beta issue I assume).
The app is free - you are pressured to register, but you can just skip that at setup. The company's business plan is to give users the option to order supplies from them, so they seem to update regularly.
Will post when/if I get it all sorted, but spare time has been scarce lately. I can put the 1.1.8 up if you want as is, but I offer no guarantees.
|
|
|
Post by kioskfan on Nov 25, 2018 20:28:56 GMT
Getting anywhere? I just downloaded the latest Cura and didn't find the DP5 setting and for that matter didn't find any in Matter Control? What slicer are you using?
|
|
jon
New Member
Posts: 7
|
Post by jon on Nov 25, 2018 20:55:29 GMT
Running 1.1.8 for now. Just installed a Titan extruder so fiddling on getting the proper flow rate. Could not take the clicking & fails from the stock extruder anymore.
|
|
jon
New Member
Posts: 7
|
Post by jon on Nov 25, 2018 20:56:32 GMT
I am using matter control for the moment. Have not tried the newest cura yet
|
|
|
Post by kioskfan on Nov 25, 2018 23:47:04 GMT
Did you find a profile for Matter Control?
|
|
|
Post by esmigra on Jul 24, 2019 1:14:34 GMT
Hi Im triying wiht the marlin 2.0 bugfix but i can fint the correct board, someone can made work?
|
|
|
Post by bortolostefano on Oct 4, 2019 8:18:58 GMT
hi firmware 1.1.9 is available for DMS DP5 ? if yes where i can download it ?
thanks
|
|
|
Post by kioskfan on Oct 10, 2019 20:46:47 GMT
hi firmware 1.1.9 is available for DMS DP5 ? if yes where i can download it ? thanks It looks like the last official is dmsdp5_marlin-1.0.0.zip
|
|
|
Post by bortolostefano on Oct 11, 2019 5:56:52 GMT
hi firmware 1.1.9 is available for DMS DP5 ? if yes where i can download it ? thanks It looks like the last official is dmsdp5_marlin-1.0.0.zip mmmm..only 1.1.0 ?? in my DP5 i have installed 1.1.4. and 1.1.8 ??
|
|
|
Post by kioskfan on Oct 12, 2019 18:45:46 GMT
It looks like the last official is dmsdp5_marlin-1.0.0.zip mmmm..only 1.1.0 ?? in my DP5 i have installed 1.1.4. and 1.1.8 ?? Do you have working code you can share?
|
|
|
Post by bortolostefano on Oct 15, 2019 6:15:09 GMT
the 1.1.4 you can find here: mega.nz/#!dw4EDRhb!8Gy7tkmdA4bxDTl5QKsbbPpaEUaHhg89I7TTyrjL1No but 1.1.8 where is ?
|
|
|
Post by kioskfan on Oct 15, 2019 15:00:11 GMT
the 1.1.4 you can find here: mega.nz/#!dw4EDRhb!8Gy7tkmdA4bxDTl5QKsbbPpaEUaHhg89I7TTyrjL1No but 1.1.8 where is ? Thank you, any chance of doing a review of this?
|
|