Welcome to the user created and maintained forum to support and discuiss the DMS DP5 3D Printer. Users please register and post !!!

Reply

Elephant - wood filament

« Prev
1
Next »

cipispe New Member Posts: 46	Elephant - wood filament Sept 12, 2017 17:09:54 GMT kioskfan and tanephar like this Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by cipispe on Sept 12, 2017 17:09:54 GMT Hi. This is one of my first prints, with wood filament from Alliexpress. I did some sanding and I think it came out pretty well.

tanephar Full Member Posts: 111	Elephant - wood filament Sept 13, 2017 10:52:32 GMT Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by tanephar on Sept 13, 2017 10:52:32 GMT Interested to know what your temps and settings where for the wood filament, looks good with a little post production. How did you find the filament to print with?

cipispe
New Member

Posts: 46

Elephant - wood filament Sept 13, 2017 18:42:19 GMT tanephar likes this

Quote

Post by cipispe on Sept 13, 2017 18:42:19 GMT

I printed it last year.
I hope I remember corectly the settings: extruder temp 210 deg C, bed 70 deg C, 0.4 nozzle, infill 50 %, with supports 15 %. I used Simplify 3d.
I bought wood filament from Alliexpress :
www.aliexpress.com/item/100g-3D-Printer-Wood-Filament-1-75-MM-3-0-MM-Filament-100g-ABS-PLA-PA/32347329148.html?spm=2114.10010108.1000014.5.4b24ae2burdbhH&traffic_analysisId=recommend_3035_null_null_null&scm=1007.13338.80878.000000000000000&pvid=ab2df2e6-e5da-4560-8859-7b6d754084dd&tpp=1

Reply

Quick Reply