andyt
New Member
Posts: 1
|
Post by andyt on Apr 2, 2018 18:12:33 GMT
Anyone replaced the standard sensor with a BLtouch, and would acre to share the process?
I'm expecting my DP5 in a few days, and intend to use a glass bad at some point, so was looking for information on replacing the stock sensor with a BLTouch.
|
|
|
Post by kioskfan on Apr 2, 2018 20:12:47 GMT
I haven't done it myself but it looks like all you have to do is reflash the firmware with BLtouch enabled and wire the new sensor up to the old one. You might also need a mounting adapter.
|
|
|
Post by mexus on Jun 5, 2018 15:15:17 GMT
Or just stick aluminum foil on the glass where the probe probes. Only 4 point on the original firmware.
|
|
|
Post by kioskfan on Jun 5, 2018 16:00:43 GMT
Or just stick aluminum foil on the glass where the probe probes. Only 4 point on the original firmware. That works? Surprisingly simple solution, thanks.
|
|
|
Post by theking3737 on Jul 26, 2019 13:32:14 GMT
I actually managed to get the BLTouch working on the DP5.
|
|