|
Post by tanephar on Jan 13, 2018 2:53:11 GMT
Hi folks,
currently working on Marlin Firmware 1.1.8, I was interested to know what languages you would like to see, obviously English, but it would be a lot easier methinks if I uploaded other langauges to my cloud drive for you guys to download, and then run your update so you will have native language on LCD. So let me know what you want and I will make it happen for you. I'm thinking that English, Spanish, German, Korean and Chinese would be a good start.
|
|
|
Post by 3dprintingmeathead on Jan 13, 2018 2:55:21 GMT
Is 1.1.8 stable yet? Last I checked it said stable but users reported it as a WIP. That was a few months ago though
|
|
|
Post by tanephar on Jan 13, 2018 8:55:55 GMT
The one I got from github is listed as stable. I'm going to beta test first before I release it, just thought I'd put this out there to see what languages are wanted. Plus looking at the forum, the errors don't seem to affect our printer.
Uploaded to machine today to beta test, hmm seems to be a problem with the stepper motor logic, so back to the drawing board at this stage.
I can still do the same thing for 1.1.4 version, that set different languages so it is an easy option for users.
|
|
|
Post by herois on Mar 2, 2018 16:34:31 GMT
where can I download 1.1.8?
|
|
|
Post by tanephar on Mar 3, 2018 0:58:38 GMT
where can I download 1.1.8? You can download it from Marlin.Github, but it is not set up for the DP5, I started to configure for our printer, I ran into issues with stepper motor logic. Since then life has been a bit of a rollercoaster, as it can be at times, and I haven't had time to look at firmware or even do any printing in over a month. The url would be: marlinfw.org/meta/download/
|
|
|
Post by herois on Mar 4, 2018 18:39:48 GMT
thank you
|
|
|
Post by mexus on Jun 5, 2018 15:19:24 GMT
I've made a 1.1.8 build for my DMS DP5 but I've added a lot of extras, which would not work on a standard DMS DP5 like: - Switching ON/Off LCD backlight - Turn ON/Off the PSU - Turn ON/off motherboard fan - Turn ON/off hotend fan
The firmware is stable.
@op post the source and the users can select the language they need by themselves
|
|
|
Post by herois on Jul 25, 2018 9:25:28 GMT
hey, how are you marlin 1.1.8, would you be able to release the compiled marlin for DMS DP5 ...
|
|